Subea+ SCD 500 Men’s 5.5 mm Scuba Diving Full Wetsuit

Ref :
8242304
Key feature
A diving wetsuit for every season that adjusts your protection in temperate waters almost all year round.

Products benefits

Thermal insulation
5.5 mm full wetsuit Seams taped using a GBS glued and blind stitched assembly
Easy dressing
100% stretch neoprene. Zips on the ankles and wrists for easier dressing.
Waterproof
Extremities: smooth double cuff (when turned up) for maximum waterproof sealing.
Freedom of movement
Anatomic cut frees up arm movement. No stitching under the arms.
Abrasion resistance
Ergonomic knee and shoulder reinforcements leg bottoms reinforced with Supratex.

Features

Composition
Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
Approved by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by Decathlon in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Tests
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Designed to :
scuba divers in temperature waters between 16° and 24°.
Warranty
2 years
Download the instructions

Advice

Maintenance advice
Rinse regularly in clean water, do not machine wash, do not leave in direct sunlight as this speeds up the ageing process of neoprene.
Storage Tips
Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
RESTRICTED USE
swimming

Additional information

Details on thermal insulation
5.5 mm full one-piece wet type with back zip. Seams taped using a GBS (glued and blind stitched) assembly. Once a thin layer of water (that enters through the zip) gets trapped between you body and the wetsuit, the water stays warm as it is not replaced. This thin layer of water keeps you warm. smooth double cuff with zips on the wrists for easier dressing and improved watertightness, when the cuffs are turned up
Ultra supple neoprene for even greater comfort and warmth!
100% stretch neoprene (FFA) for added freedom of movement during your dive and to make it easier to get into your wetsuit. Thermospan neoprene panels on the chest: even softer for increased comfort and warmth! Weight of the wetsuit (size L): 1.7 kg
GBS (glued and blind stitched) assembly
First, the neoprene is bonded, and then stitched for maximum resistance to abrasion. A specific stitch is used: the needle does not pass completely through the neoprene to prevent water from entering the jacket when diving.
Accessories
Wrist protection to prevent the dive computer from turning.
Thermal performance class
This scuba diving suit provides thermal protection that has been tested by the independent INPP institute in order to validate its compliance with the current standard (EN 14225-1: 2005). This suit is certified CLASS C A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F)
Adjust your warmth and the thickness of your suit!
When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1mm under-shorty or a 5.5 mm over-shorty.
What is a wet wetsuit?
This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.
Tips on how to get into a wetsuit
Put your foot in a plastic bag. Then put your leg into your wetsuit. Your foot comes out completely and smoothly! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
Tips on how to take care of your wetsuit
1) After each session, soak the wetsuit in clean water, on the outside and the inside 2) Use a bactericide solution to clean 3) Rinse thoroughly in clean water 4) Dry on a large hangar in a well ventilated place in the shade. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.
What is the SUBEA brand?
Tribord Diving is now called SUBEA, the Decathlon brand dedicated to underwater sports (snorkelling, scuba diving, spearfishing and free-diving). The markings on all our diving products will gradually be replaced. Why SUBEA? Because: "SUBaquatic Experiences are Amazing"! For more information: www.subea.com

Users reviews

Write the first review

Post a comment
TOP OF PAGE