SCUBA diving hood for 7mm semi-dry wetsuits

Ref :
Key feature
A 7 mm diving hood to be worn with your wetsuit, to adapt your thermal insulation to the diving environment.Fitted with a clip that can be attached to the SUBEA semi-dry wetsuit.

Products benefits

Thermal insulation
7mm stretch neoprene hood with smooth edges around the face.
Freedom of movement
Air Expulse System:hood made with holes to allow air to escape.
Easy dressing
100 % stretch neoprene. Designed to be easy and quick to put on.
Hood fitted with a clip that can be attached to the SUBEA semi-dry wetsuit.
The grey strip on the top of the head makes divers more visible.


Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
Approved by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by DECATHLON in Hendaye - France.The centre uses SUBEA diving equipment throughout the year.The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Designed to :
regular SCUBA divers in waters between 10 °C and 18 °C.
2 years


Storage Tips
Dry your wetsuit out of the sun and well clear of all sources of heat.Store your wetsuit on a hanger to keep its shape and conserve the neoprene.

Additional information

Technical specifications
A 7 mm thick neoprene hood, with plush loop interior, that fits flat against the face with a preformed chin.The central grey band is made of stretch neoprene to best adapt to the shape of the head.Air Expulse system: a system to evacuate air bubbles trapped in the hood. It features a snap hook to attach it to the right thigh of the suit.
GBS (glued and blind stitched) assembly
The seams of the balaclava are watertight, sewn with GBS stitching (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
Adjust the thickness, adjust your warmth!
When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
Tips on how to take care of your wetsuit
1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well ventilated place.Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.
What is the SUBEA brand?
Tribord Diving is now called SUBEA, the Decathlon brand dedicated to underwater sports (snorkelling, SCUBA diving, spearfishing and free-diving).The markings on all our diving products will gradually be replaced. Why SUBEA?Because: "SUBaquatic Experiences are Amazing"!For more information:

Users reviews

Write the first review

Post a comment