SCD 100 Women's 3 mm Full Diving Wetsuit with Back Zip.

Ref :
Key feature
Diving wetsuit for warm waters. Comfortable and easy to put on!

Products benefits

Thermal insulation
3 mm full wetsuit. Seams taped using a GBS glued and blind stitched assembly
Rolled, smooth edged cuffs and ankles for maximum watertightness.
Easy dressing
One-piece wetsuit with back zip fastener.
Freedom of movement
Anatomic cut frees up arm movement.No seams under the armpits.
Ergonomic knee reinforcements.
Anatomic design
Special cut for women.


Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
Approved by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye - France.The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA diving products:from the design phase with the SUBEA team (product manager, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Designed to :
for female SCUBA divers in tropical waters (+24 °C).
2 years
Download the instructions


Maintenance advice
Rinse in fresh water. Do not leave to dry in the sun.
Storage Tips
Dry your wetsuit out of the sun and well clear of all sources of heat.Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Swimming and wave sports.

Additional information

Details on thermal insulation
3 mm full one-piece wet type with back zip.Seams taped using a GBS (glued and blind stitched) assembly. Once a thin layer of water (that enters through the zip) gets trapped between you body and the wetsuit, the water stays warm as it is not replaced.This thin layer of water keeps you warm. Rolled, smooth edged cuffs, ankles and neck for maximum watertightness.
GBS (glued and blind stitched) assembly
The seams of the wetsuit are waterproof due to GBS assembly (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
Designed for the female body shape!
Neoprene wetsuits must be skin tight to be effective, that's why SUBEA has developed specific sizing for the female body. The designs and prototypes of these products are tested "by women, for women"!
Resistance to rubbing
The wetsuit is equipped with reinforcements on the knees to increase resistance.
Why use a 3 mm wetsuit?
Even in warm waters, the body ends up cooling down (25 times faster than in the air). Use a thin 3 mm wetsuit that will allow you to delay this drop in temperature so that you can enjoy your activity for longer.In addition, use a full wetsuit to fully protect you from UV rays and the underwater environment (coral, etc.).
Thermal performance class
This SCUBA diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille-France) in order to validate its compliance with the current standard (EN 14225-1: 2005). This wetsuit is certified for use in waters warmer than 25°C.
What is a wet diving wetsuit?
This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.
Tips on how to get into a wetsuit
Put your foot in a plastic bag, then slip your leg into your wetsuit.You entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist.The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
Tips on how to take care of your wetsuit
1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well ventilated place. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.
What is the SUBEA brand?
Tribord Diving is now called SUBEA, the Decathlon brand dedicated to underwater sports (snorkelling, SCUBA diving, spearfishing and free-diving).The markings on all our diving products will gradually be replaced. Why SUBEA? Because: "SUBaquatic Experiences are Amazing"! For more information:
Weight of the wetsuit (size L)
Weight: 1.07 kg (with production tolerance).

Users reviews

Write the first review

Post a comment