HOW TO INSTALL A WISHBONE ON SPEARFISHING SPEARGUN BANDS

OUR TIPS ON HOW TO INSTALL A WISHBONE ON A PAIR OF BANDS 

The process explained!

In this example, we are going to use a jointed wishbone.

First of all, check that your bands are fully screwed onto the muzzle of your speargun if you have a closed muzzle. Screw one end of the wishbone onto one of the bands until you reach the end of the thread. Make sure the notch of the wishbone is facing upwards! 
Then screw the other end onto the remaining band until you reach the end of the thread.

Now you know how to install a wishbone on a pair of bands.

IN CONNECTION WITH THIS ARTICLE, SUBEA RECOMMENDS:

CHECK OUT OUR OTHER SPEARFISHING AND FREEDIVING GUIDES!

Advice
how to choose diving snorkeling spearfishing freediving fins subea
Do you enjoy snorkeling, scuba diving or even spearfishing? Fins will be an important part of your gear. But what are the different types of fins? Which one should you choose for your sport? Subea answers all of your questions in this simple and practical guide.

ARTICLE WRITTEN BY

baptiste subea digital manager
Baptiste, Subea Digital Manager 

I'm Subea's Digital Manager. I'm passionate about spearfishing and freediving, and have been scuba diving for over 15 years. After my Level 1 FFESSM, I worked my way up to becoming a PADI Rescue Diver.

TOP OF PAGE